grillplate
Freshly Joined Member
Hallo,
[Ich habe diesen Beitrag mit Google übersetzt, bitte entschuldigen Sie die Rechtschreibfehler.]
Ich konfiguriere meinen Qbittorrent-Client so, dass er mit einem kaskadierenden 2-Hop-VPN-Setup funktioniert. Ich möchte in Qbittorrent keine bestimmte Netzwerkschnittstelle binden, sodass die Übertragung immer über diese Netzwerkschnittstelle erfolgt.
Meine VPN-Konfiguration: 2 Hops kaskadierendes VPN, OpenVPN, Stealh HTTP/Auto, Leckschutz permanent (alle Optionen aktiviert), eine 1-zu-1-Portweiterleitung für meine VPN-Verbindung mit dem zweiten Hop, primäre IP erzwingen = EIN, Neuro-Routing = AUS ( ON macht alles langsamer), OpenVPN-Protokoll=UDP (TCP ist sehr langsam)
Beim Binden der Netzwerkschnittstelle in Qbittorrent stehen 4 Optionen zur Auswahl:
Ich teste mit einem großen Torrent, der hohe/maximale Geschwindigkeiten erzeugen kann.
Wenn ich Option 1 wähle: Alle 3 Schnittstellen weisen Anzeichen von Datenverkehr auf (einschließlich der lokalen Hardware-Netzwerkkarte!), ist die Gesamtgeschwindigkeit des Torrents maximal
Wenn ich Option 2 wähle: Nur diese Schnittstelle (Ethernet/lokale Netzwerkkarte) zeigt Datenverkehr an. Die Geschwindigkeit ist maximal
Wenn ich Option 3 wähle: Es gibt keine Verbindung und keinen Verkehr
Wenn ich Option 4 wähle: Nur diese Schnittstelle (Perfect Privacy VPN 2) zeigt Datenverkehr an. Allerdings erreicht es nicht die Höchstgeschwindigkeit, sondern nur etwa ein Drittel der Höchstgeschwindigkeit
Keine der Optionen erscheint mir realisierbar/ok.
Option 1: hat maximale Geschwindigkeit, aktiviert aber auch die Ethernet-/lokale Schnittstelle (!). Das bereitet mir Sorgen, da dies bedeuten würde, dass der Leckschutz irgendwie nicht funktioniert und der Datenverkehr über meine lokale Netzwerkschnittstelle an meinen Router weitergeleitet wird Modem unter Umgehung des VPN
Option 2: gleiches Problem wie bei Option 1 (Verkehrsumgehung des Leckschutzes)
Option 3: offensichtlich, kein Verkehr
Option 4: deutlich niedrigere Geschwindigkeiten und nicht sicher, ob der Datenverkehr über die beiden Hops geleitet wird, da PP VPN 2 der letzte Hop in meiner Kaskade ist
Daher meine Fragen an Sie:
Am besten,
GP
[Ich habe diesen Beitrag mit Google übersetzt, bitte entschuldigen Sie die Rechtschreibfehler.]
Ich konfiguriere meinen Qbittorrent-Client so, dass er mit einem kaskadierenden 2-Hop-VPN-Setup funktioniert. Ich möchte in Qbittorrent keine bestimmte Netzwerkschnittstelle binden, sodass die Übertragung immer über diese Netzwerkschnittstelle erfolgt.
Meine VPN-Konfiguration: 2 Hops kaskadierendes VPN, OpenVPN, Stealh HTTP/Auto, Leckschutz permanent (alle Optionen aktiviert), eine 1-zu-1-Portweiterleitung für meine VPN-Verbindung mit dem zweiten Hop, primäre IP erzwingen = EIN, Neuro-Routing = AUS ( ON macht alles langsamer), OpenVPN-Protokoll=UDP (TCP ist sehr langsam)
Beim Binden der Netzwerkschnittstelle in Qbittorrent stehen 4 Optionen zur Auswahl:
- Jede Schnittstelle (funktioniert mit allen Netzwerkschnittstellen)
- Ethernet (das ist meine lokale Hardware-Netzwerkkarte selbst, mit lokaler IP und Router-Gateway)
- Perfect Privacy VPN 1 (das ist mein erster Schritt in der Kaskade)
- Perfect Privacy VPN 2 (dies ist mein zweiter und letzter Hop in der Kaskade und auch die IP-Adressen nach außen)
Ich teste mit einem großen Torrent, der hohe/maximale Geschwindigkeiten erzeugen kann.
Wenn ich Option 1 wähle: Alle 3 Schnittstellen weisen Anzeichen von Datenverkehr auf (einschließlich der lokalen Hardware-Netzwerkkarte!), ist die Gesamtgeschwindigkeit des Torrents maximal
Wenn ich Option 2 wähle: Nur diese Schnittstelle (Ethernet/lokale Netzwerkkarte) zeigt Datenverkehr an. Die Geschwindigkeit ist maximal
Wenn ich Option 3 wähle: Es gibt keine Verbindung und keinen Verkehr
Wenn ich Option 4 wähle: Nur diese Schnittstelle (Perfect Privacy VPN 2) zeigt Datenverkehr an. Allerdings erreicht es nicht die Höchstgeschwindigkeit, sondern nur etwa ein Drittel der Höchstgeschwindigkeit
Keine der Optionen erscheint mir realisierbar/ok.
Option 1: hat maximale Geschwindigkeit, aktiviert aber auch die Ethernet-/lokale Schnittstelle (!). Das bereitet mir Sorgen, da dies bedeuten würde, dass der Leckschutz irgendwie nicht funktioniert und der Datenverkehr über meine lokale Netzwerkschnittstelle an meinen Router weitergeleitet wird Modem unter Umgehung des VPN
Option 2: gleiches Problem wie bei Option 1 (Verkehrsumgehung des Leckschutzes)
Option 3: offensichtlich, kein Verkehr
Option 4: deutlich niedrigere Geschwindigkeiten und nicht sicher, ob der Datenverkehr über die beiden Hops geleitet wird, da PP VPN 2 der letzte Hop in meiner Kaskade ist
Daher meine Fragen an Sie:
- Wie ist es möglich, dass die lokale Netzwerkschnittstelle (Optionen 1 und 2) starken Datenverkehr anzeigt, während VPN und VPN-Leak-Schutz aktiv sind?
- Welche Option sollte ich wählen, um meine Qbittorrent-Verbindungen sicher zu machen, indem ich immer die VPN-Verbindung verwende?
- Oder was soll ich anders machen?
Am besten,
GP