Beantwortet: Probleme mit VPN Manager

L

Lokko

Junior Member
Ich bin seit paar Tagen auf Windows 10 umgestiegen. Seitdem kann ich mich mit den VPN Manager auf keinen Server mehr verbinden. Ich habe nichts verändert an den Manager - es sind die Grundeinstellungen, und ich verwende IPSEC. Der Manager erkennt meinen Account, aber verbindet nicht. Wenn ich die Windows Funktion für VPN benutzen, so kann ich mich mit einem VPN Server verbinden.

So sieht der Log aus, wenn ich mich mit einem Server versuche zu verbinden über den VPN Manager

02.10.2015 17:54:46 Debug Debug: config connect called, startupDelay + 0
02.10.2015 17:54:46 Log DisconnectReason set to NoDisconnect in connect_thread
02.10.2015 17:54:46 Log Debug: connect_thread started
02.10.2015 17:54:46 Log State Change Event - Initializing
02.10.2015 17:54:46 Log hangtimer reset calling in statechange to init
02.10.2015 17:54:47 Log Waiting for IPSEC device to get ready
02.10.2015 17:54:50 Log IPSEC device ready
02.10.2015 17:54:50 Log Checking firewall and DNS leak protection settings
02.10.2015 17:54:55 Log Waiting for network to get ready
02.10.2015 17:54:59 Debug connectthread exiting4
02.10.2015 17:54:59 Log OpenPort
02.10.2015 17:54:59 Log PortOpened
02.10.2015 17:54:59 Log ConnectDevice
02.10.2015 17:54:59 Log DeviceConnected
02.10.2015 17:54:59 Log AllDevicesConnected
02.10.2015 17:54:59 Log Authenticate
02.10.2015 17:54:59 Log Authenticate
02.10.2015 17:55:00 Log State Change Event - Error
02.10.2015 17:55:00 Log error handler is setting disconnect reasond to error!
02.10.2015 17:55:00 Error Error Code:837 DotRas.RasDialException: Ungültige Tunnel-ID.
02.10.2015 17:55:00 Log State Change Event - Stopped
02.10.2015 17:55:00 Log state changes to stoped, reason: Error
02.10.2015 17:55:00 Log Handle disconnect for reason Error error:Unknown
02.10.2015 17:55:00 Error Last error was unknown.. Reconnecting anyway.
02.10.2015 17:55:00 Debug Debug: config connect called, startupDelay + 4000
02.10.2015 17:55:01 Log DisconnectReason set to NoDisconnect in connect_thread
02.10.2015 17:55:01 Log Debug: connect_thread started
02.10.2015 17:55:01 Log State Change Event - Initializing
02.10.2015 17:55:01 Log hangtimer reset calling in statechange to init
02.10.2015 17:55:01 Log Waiting for system to get ready..
02.10.2015 17:55:05 Log Waiting for IPSEC device to get ready
02.10.2015 17:55:05 Log IPSEC device ready
02.10.2015 17:55:05 Log Checking firewall and DNS leak protection settings
02.10.2015 17:55:06 Log Waiting for network to get ready
02.10.2015 17:55:10 Debug connectthread exiting4
02.10.2015 17:55:10 Log OpenPort
02.10.2015 17:55:10 Log PortOpened
02.10.2015 17:55:10 Log ConnectDevice
02.10.2015 17:55:10 Log DeviceConnected
02.10.2015 17:55:10 Log AllDevicesConnected
02.10.2015 17:55:10 Log Authenticate
02.10.2015 17:55:10 Log Authenticate
02.10.2015 17:55:11 Log State Change Event - Error
02.10.2015 17:55:11 Log error handler is setting disconnect reasond to error!
02.10.2015 17:55:12 Error Error Code:837 DotRas.RasDialException: Ungültige Tunnel-ID.
02.10.2015 17:55:12 Log State Change Event - Stopped
02.10.2015 17:55:12 Log state changes to stoped, reason: Error
02.10.2015 17:55:12 Log Handle disconnect for reason Error error:ConnectFailedIpsec
02.10.2015 17:55:12 Debug Debug: config connect called, startupDelay + 4000
02.10.2015 17:55:12 Log DisconnectReason set to NoDisconnect in connect_thread
02.10.2015 17:55:12 Log Debug: connect_thread started
02.10.2015 17:55:12 Log State Change Event - Initializing
02.10.2015 17:55:12 Log hangtimer reset calling in statechange to init
02.10.2015 17:55:12 Log Waiting for system to get ready..
02.10.2015 17:55:16 Log Waiting for IPSEC device to get ready
02.10.2015 17:55:17 Log IPSEC device ready
02.10.2015 17:55:17 Log Checking firewall and DNS leak protection settings
02.10.2015 17:55:17 Log Waiting for network to get ready
02.10.2015 17:55:22 Debug connectthread exiting4
02.10.2015 17:55:22 Log OpenPort
02.10.2015 17:55:22 Log PortOpened
02.10.2015 17:55:22 Log ConnectDevice
02.10.2015 17:55:22 Log DeviceConnected
02.10.2015 17:55:22 Log AllDevicesConnected
02.10.2015 17:55:22 Log Authenticate
02.10.2015 17:55:22 Log Authenticate
02.10.2015 17:55:23 Log State Change Event - Error
02.10.2015 17:55:23 Log error handler is setting disconnect reasond to error!
02.10.2015 17:55:23 Error Error Code:837 DotRas.RasDialException: Ungültige Tunnel-ID.
02.10.2015 17:55:23 Log State Change Event - Stopped
02.10.2015 17:55:23 Log state changes to stoped, reason: Error
02.10.2015 17:55:23 Log Handle disconnect for reason Error error:ConnectFailedIpsec
02.10.2015 17:55:23 Debug Debug: config connect called, startupDelay + 4000
02.10.2015 17:55:23 Log DisconnectReason set to NoDisconnect in connect_thread
02.10.2015 17:55:23 Log Debug: connect_thread started
02.10.2015 17:55:23 Log State Change Event - Initializing
02.10.2015 17:55:23 Log hangtimer reset calling in statechange to init
02.10.2015 17:55:24 Debug Waiting for user decision
02.10.2015 17:55:24 Log hangtimer reset calling connect_thread
02.10.2015 17:55:26 Debug Waiting for user decision
02.10.2015 17:56:04 Log Tunnel Frankfurt Disconnect Called Reason:UserClicked
02.10.2015 17:56:04 Log IpSec Connnection Disconnect called
02.10.2015 17:56:04 Log IpSec Connnection Disconnect calling state change to stop
02.10.2015 17:56:04 Log State Change Event - Stopped
02.10.2015 17:56:04 Log state changes to stoped, reason: UserClicked
02.10.2015 17:56:04 Log Handle disconnect for reason UserClicked error:NoError
 
Solution
PP Daniel
Hi Lokko,

IPSec funktioniert unter Windows 10 schlichtweg nicht, das liegt nicht an uns da muss MS wohl noch ran und patchen. Einstweilen kannst du also unter Windows 10 nur OpenVPN nutzen.
Sort by date Sort by votes
You must log in or register to reply here.
Back
Top