Answered: Windows 10 - V1.7.28.0 Still not working

jackdh

Junior Member
Would love to get the manager working again so I can use IPSEC,

Although it seems to fail after the authenticated then just restarts.

Log
Code:
15/08/2015 10:21:20   Debug  Debug: config connect called,  startupDelay + 4000
15/08/2015 10:21:20   Log  DisconnectReason set to NoDisconnect in connect_thread
15/08/2015 10:21:20   Log  Debug: connect_thread started
15/08/2015 10:21:20   Log  State Change Event - Initializing
15/08/2015 10:21:20   Log  hangtimer reset calling in statechange to init
15/08/2015 10:21:20   Log  Waiting for system to get ready..
15/08/2015 10:21:24   Log  Waiting for IPSEC device to get ready
15/08/2015 10:21:24   Log  IPSEC device ready
15/08/2015 10:21:24   Log  Checking firewall and DNS leak protection settings
15/08/2015 10:21:26   Log  Tunnel Nottingham Disconnect Called Reason:UserClicked
15/08/2015 10:21:26   Log  IpSec Connnection Disconnect called
15/08/2015 10:21:26   Log  IpSec Connnection Disconnect calling state change to stop
15/08/2015 10:21:26   Log  State Change Event - Stopped
15/08/2015 10:21:26   Log  state changes to stoped, reason: UserClicked
15/08/2015 10:21:26   Log  Handle disconnect for reason UserClicked error:NoError
15/08/2015 10:21:27   Log  IpSec Connnection Disconnect called
15/08/2015 10:21:27   Log  IpSec Connnection Disconnect calling state change to stop
15/08/2015 10:21:27   Log  Waiting for network to get ready
15/08/2015 10:21:31   Debug  disconnect triggered, not starting tunnel1
15/08/2015 10:24:17   Debug  Debug: config connect called,  startupDelay + 0
15/08/2015 10:24:17   Log  DisconnectReason set to NoDisconnect in connect_thread
15/08/2015 10:24:17   Log  Debug: connect_thread started
15/08/2015 10:24:17   Log  State Change Event - Initializing
15/08/2015 10:24:17   Log  hangtimer reset calling in statechange to init
15/08/2015 10:24:17   Log  Waiting for IPSEC device to get ready
15/08/2015 10:24:17   Log  IPSEC device ready
15/08/2015 10:24:17   Log  Checking firewall and DNS leak protection settings
15/08/2015 10:24:20   Log  Waiting for network to get ready
15/08/2015 10:24:24   Debug  connectthread exiting4
15/08/2015 10:24:24   Log  OpenPort
15/08/2015 10:24:24   Log  PortOpened
15/08/2015 10:24:25   Log  ConnectDevice
15/08/2015 10:24:25   Log  DeviceConnected
15/08/2015 10:24:25   Log  AllDevicesConnected
15/08/2015 10:24:25   Log  Authenticate
15/08/2015 10:24:25   Log  Authenticate
15/08/2015 10:24:26   Log  State Change Event - Error
15/08/2015 10:24:26   Log  error handler is setting disconnect reasond to error!
15/08/2015 10:24:26   Error  Error Code:837 DotRas.RasDialException: Invalid Tunnel ID.
15/08/2015 10:24:26   Log  State Change Event - Stopped
15/08/2015 10:24:26   Log  state changes to stoped, reason: Error
15/08/2015 10:24:26   Log  Handle disconnect for reason Error error:Unknown
15/08/2015 10:24:26   Error  Last error was unknown.. Reconnecting anyway.
15/08/2015 10:24:26   Debug  Debug: config connect called,  startupDelay + 4000
15/08/2015 10:24:27   Log  DisconnectReason set to NoDisconnect in connect_thread
15/08/2015 10:24:27   Log  Debug: connect_thread started
15/08/2015 10:24:27   Log  State Change Event - Initializing
15/08/2015 10:24:27   Log  hangtimer reset calling in statechange to init
15/08/2015 10:24:27   Log  Waiting for system to get ready..
15/08/2015 10:24:31   Log  Waiting for IPSEC device to get ready
15/08/2015 10:24:31   Log  IPSEC device ready
15/08/2015 10:24:31   Log  Checking firewall and DNS leak protection settings
15/08/2015 10:24:32   Log  Waiting for network to get ready
15/08/2015 10:24:37   Debug  connectthread exiting4
15/08/2015 10:24:37   Log  OpenPort
15/08/2015 10:24:37   Log  PortOpened
15/08/2015 10:24:37   Log  ConnectDevice
15/08/2015 10:24:37   Log  DeviceConnected
15/08/2015 10:24:37   Log  AllDevicesConnected
15/08/2015 10:24:37   Log  Authenticate
15/08/2015 10:24:37   Log  Authenticate
15/08/2015 10:24:38   Log  State Change Event - Error
15/08/2015 10:24:38   Log  error handler is setting disconnect reasond to error!
15/08/2015 10:24:38   Error  Error Code:837 DotRas.RasDialException: Invalid Tunnel ID.
15/08/2015 10:24:38   Log  State Change Event - Stopped
15/08/2015 10:24:38   Log  state changes to stoped, reason: Error
15/08/2015 10:24:38   Log  Handle disconnect for reason Error error:ConnectFailedIpsec
15/08/2015 10:24:38   Debug  Debug: config connect called,  startupDelay + 4000
15/08/2015 10:24:38   Log  DisconnectReason set to NoDisconnect in connect_thread
15/08/2015 10:24:38   Log  Debug: connect_thread started
15/08/2015 10:24:38   Log  State Change Event - Initializing
15/08/2015 10:24:38   Log  hangtimer reset calling in statechange to init
15/08/2015 10:24:39   Log  Waiting for system to get ready..
15/08/2015 10:24:43   Log  Waiting for IPSEC device to get ready
15/08/2015 10:24:43   Log  IPSEC device ready
15/08/2015 10:24:43   Log  Checking firewall and DNS leak protection settings
15/08/2015 10:24:44   Log  Waiting for network to get ready
15/08/2015 10:24:44   Log  Tunnel Nottingham Disconnect Called Reason:UserClicked
15/08/2015 10:24:44   Log  IpSec Connnection Disconnect called
15/08/2015 10:24:44   Log  IpSec Connnection Disconnect calling state change to stop
15/08/2015 10:24:45   Log  State Change Event - Stopped
15/08/2015 10:24:45   Log  state changes to stoped, reason: UserClicked
15/08/2015 10:24:45   Log  Handle disconnect for reason UserClicked error:NoError
15/08/2015 10:24:48   Debug  disconnect triggered, not starting tunnel1
 
Solution
Hi,

we are aware of this issue. It is caused by incompatibilities in the DotRas library, and they are aware of it already. We have no choice but to wait for an update.
Hi,

we are aware of this issue. It is caused by incompatibilities in the DotRas library, and they are aware of it already. We have no choice but to wait for an update.
 
Solution
Back
Top